SURFACE CORE DRILL

Exploration Drill
Exploration Drill

recommended

max

(depth in metres)

HC5000MAX

Configure Your Custom Hydracore

reset to base model

  • Options:

    Base Model

    Power

    • Cummins 260HP T3 Turbo Diesel – Total 260HP
      • Screw system for ease of removing the engine for heli-transport
      • Radiator Guard

    Drill Module

    • Lightweight aluminum drill skid
    • Three Piece Drill Mast
    • Uses 10ft (3M) Drill Rods
    • Pull Rods up to 20ft (6M) length
    • Hydraulic rod pulling with the drill head – Axial Pull 70,000lb (31,750Kg)
    • Hydraulic feed control with 72” (1.82M) stroke
    • Hydraulic Mast Raise with locking support legs
    • Rotation Safety Guard

    Drill Head

    • Hydracore Variable Speed Drill Head
      • Low maintenance chuck with no release bearings on internal cylinders
      • Quick release swing out design to clear wireline
      • Carbon Belt Drive

    Footclamp

    • Hydraulic Rod Break Foot Clamp B – PW size – Axial Capacity 70,000lb (31,750Kg)

    Hydraulic Control Module

    • Direct Hydraulic Controls – 135GPM (500 Lpm)
    • Single E-Stop located in the control panel
    • Hydraulic controls provided for auxiliary Water Pump and two Mudmixers
    • Water Tree with dump valve

  • Power

    • Cummins 260Hp T3 Turbo Diesel (standard)
      • Screw system for ease of removing the engine for heli-transport
      • Radiator Guard
    • Cummins 260Hp T4 Turbo Diesel

  • Safety

    • Auto Rotation Shutdown
      • When the rotation guard door is opened the Drill Head is prevented from turning. Built from safety rated sensors and relays.
    • Pedestal Mounted Secondary E-Stop
      • The secondary e-stop can be placed by the “drill helper” for an additional level of safety
    • Rod Handling
      • Requires selection of Drill Skid or Drill Shack

  • Drill Head

  • Winches & Hoists

    • Rod Hoist
      • Used for hoisting using the water swivel
    • Wire Line Winch 2000ft (600M)
    • Wire Line Winch with Level Wind System 2000ft (600M)
      • Level wind systems are required on some job sites, please check with your client for your specific needs.
    • Wire Line Winch with Level Wind System 5000ft (1500M)
      • Level wind systems are required on some job sites, please check with your client for your specific needs.
    • Wire Line Winch with Level Wind System 7000ft (2100M)
      • Level wind systems are required on some job sites, please check with your client for your specific needs.
    • Wire Line Winch with Level Wind System 10,000ft (3100M)
      • Level wind systems are required on some job sites, please check with your client for your specific needs.

  • Mud Mixer

    • MUD MIXER, HYDRAULIC
      • It is recommended to use two Mud Mixers, one for Mud and one for Polymers.

  • PUMPS

    • WATER PUMP 20GPM DIESEL, AB100
      • Diesel supply pump to move water from the source to the pressure pump. For long distance and elevation multiple pumps may be required.
    • WATER PUMP 40GPM HYD, KF50
      • Suited for rod sizes up to P
    • WATER PUMP 40GPM HYD, Bean 435
      • Suited for rod sizes up to P

  • SKIDS & SHACKS

    • Steel Drill Skid
      • Direct mounting for the Drill, Powerpack and Rod Sloop
      • Minimum requirement for Rod Handling option
    • Drill Shack with Steel Skid
      • Direct mounting for the Drill, Powerpack and Rod Sloop
      • Man door
      • Engine access side door
      • Upgraded requirement for Rod Handling option
    • Drill Shack – Winterized with Skid
      • Direct mounting for the Drill, Powerpack and Rod Sloop
      • Upgraded requirement for Rod Handling option
      • Man door
      • Engine access side door

  • Transport

    • Tracked Drill Carrier with Crane
      • Built on a rugged Morooka MS800 Chassis
      • Ability to carry the drill, power pack as well as general materials transport to site

  • Summary

Email My Summary

Type: (mandatory)


My HC5000MAX

    Base Model

    Power

    • Cummins 260HP T3 Turbo Diesel – Total 260HP
      • Screw system for ease of removing the engine for heli-transport
      • Radiator Guard

    Drill Module

    • Lightweight aluminum drill skid
    • Three Piece Drill Mast
    • Uses 10ft (3M) Drill Rods
    • Pull Rods up to 20ft (6M) length
    • Hydraulic rod pulling with the drill head – Axial Pull 70,000lb (31,750Kg)
    • Hydraulic feed control with 72” (1.82M) stroke
    • Hydraulic Mast Raise with locking support legs
    • Rotation Safety Guard

    Drill Head

    • Hydracore Variable Speed Drill Head
      • Low maintenance chuck with no release bearings on internal cylinders
      • Quick release swing out design to clear wireline
      • Carbon Belt Drive

    Footclamp

    • Hydraulic Rod Break Foot Clamp B – PW size – Axial Capacity 70,000lb (31,750Kg)

    Hydraulic Control Module

    • Direct Hydraulic Controls – 135GPM (500 Lpm)
    • Single E-Stop located in the control panel
    • Hydraulic controls provided for auxiliary Water Pump and two Mudmixers
    • Water Tree with dump valve

    • power

    • Cummins 260Hp T3 Turbo Diesel (standard)
      • Screw system for ease of removing the engine for heli-transport
      • Radiator Guard
    • Cummins 260Hp T4 Turbo Diesel

    • safety

      *A rotation Safety Guard and operator E-Stop come as standard*

    • Auto Rotation Shutdown
      • When the rotation guard door is opened the Drill Head is prevented from turning. Built from safety rated sensors and relays.
    • Pedestal Mounted Secondary E-Stop
      • The secondary e-stop can be placed by the “drill helper” for an additional level of safety
    • Rod Handling
      • Requires selection of Drill Skid or Drill Shack

    • drill head

      *A Hydracore “P” size head with our proprietary 70,000lb (31,750Kg) axial holding capacity chuck come as standard *

    • winches & hoists

    • Rod Hoist
      • Used for hoisting using the water swivel
    • Wire Line Winch 2000ft (600M)
    • Wire Line Winch with Level Wind System 2000ft (600M)
      • Level wind systems are required on some job sites, please check with your client for your specific needs.
    • Wire Line Winch with Level Wind System 5000ft (1500M)
      • Level wind systems are required on some job sites, please check with your client for your specific needs.
    • Wire Line Winch with Level Wind System 7000ft (2100M)
      • Level wind systems are required on some job sites, please check with your client for your specific needs.
    • Wire Line Winch with Level Wind System 10,000ft (3100M)
      • Level wind systems are required on some job sites, please check with your client for your specific needs.

    • mud mixer

    • MUD MIXER, HYDRAULIC
      • It is recommended to use two Mud Mixers, one for Mud and one for Polymers.

    • pumps

    • WATER PUMP 20GPM DIESEL, AB100
      • Diesel supply pump to move water from the source to the pressure pump. For long distance and elevation multiple pumps may be required.
    • WATER PUMP 40GPM HYD, KF50
      • Suited for rod sizes up to P
    • WATER PUMP 40GPM HYD, Bean 435
      • Suited for rod sizes up to P

    • skids & shacks

    • Steel Drill Skid
      • Direct mounting for the Drill, Powerpack and Rod Sloop
      • Minimum requirement for Rod Handling option
    • Drill Shack with Steel Skid
      • Direct mounting for the Drill, Powerpack and Rod Sloop
      • Man door
      • Engine access side door
      • Upgraded requirement for Rod Handling option
    • Drill Shack – Winterized with Skid
      • Direct mounting for the Drill, Powerpack and Rod Sloop
      • Upgraded requirement for Rod Handling option
      • Man door
      • Engine access side door

    • transport

    • Tracked Drill Carrier with Crane
      • Built on a rugged Morooka MS800 Chassis
      • Ability to carry the drill, power pack as well as general materials transport to site

    Email My Summary

    Type: (mandatory)


    Exploration Drill
    Exploration Drill
    Exploration Drill
    Exploration Drill
    Exploration Drill
    Exploration Drill
    Exploration Drill
    Exploration Drill

    Choose Hydracore
    you owe it to your bottom line

    Exploration Drill

    Powerful Turbo-Diesel Engine

    POWERFUL TURBO-DIESEL ENGINE Equipped with a smooth running  Cummins  260 HP T3 Turbo Diesel.

    Proprietary Drill Head

    Our P sized Drill Head is rated to take up to 500hp and 70,000lbs of pull-back. We have eliminated the main sources of Drill Head failures including the chuck release bearing, internal opening cylinder, and gear transmission.

    DOUBLE BREAKOUT FOOTCLAMP

    Footclamps require incredible holding power. At the same time, they need to be easy to maintain and operate. While others opt to use overly complex “chucks”, the innovative Hydracore footclamps use two standard hydraulic cylinders. The cylinders on this PW (S) sized clamp hold up to 70,000lbs and one set of jaws works for all rod sizes. No need for pipe wrenches on this rig! The powerful Double Breakout Footclamp can separate even the most stubborn rod joints.

    Adjustable Saddle Bearings

    Keeping with our maintenance friendly designs our drills offer adjustable saddle bearings. These are adjusted in several minutes allowing you to focus on putting core in the box.

    Direct Acting Hydraulic Control

    Direct acting hydraulics are the gold standard in the industry. We design all drilling functions for direct control. Optimal reliability, and maximum uptime.

    Ease of Access

    All hydraulic equipment needs attention at some point. Our innovative control panel is designed to hinge open and expose all components for ease of maintenance and cleaning.

    HC5000MAX engine Power Pack

    Exploration Drill

    HC5000MAX drill

    Exploration Drill

    Detailed Specifications

    • HC5000MAX
    • Imperial
    • Metric
    • Move Method
    • Helicopter, Truck
    • Drill Method
    • Core (B, N, H, P)
    • Power
    • 260HP
    • 193KW
    • Drill Torque
    • 1700ft-lbs
    • 2300Nm
    • Pull Back
    • 70000lb
    • 31750Kg
    • Feed Stroke
    • 72″
    • 1.82M
    • Rod Length
    • 10ft
    • 3M
    • Rod Pull Length
    • 20ft
    • 6M
    • Max. Weight/Move
    • 1700lb
    • 770Kg
    • Total Weight
    • 6500lb
    • 2950Kg